You are here: / How can I check the functionality of the limit indicator?

How can I check the functionality of the limit indicator?

/in , ,

In principle, it eliminates the possibility of overfilling a fuel oil tank. First, the tank truck driver must determine the free capacity – for example, they can do this using the SmartBox®. Based on this value, the mineral oil retailer knows how many litres of fuel oil fit into the tank. If they have miscalculated or the filling level indicator is not displaying correctly, the limit indicator still provides protection. But how do you ensure that the limit indicator will definitely respond when it comes to it? Read more

Can I operate 30 mbar gas equipment if the caravan or motorhome gas system has 50 mbar?

/in ,

Brand new caravans or motorhomes are now always fitted with an LPG system with a working pressure of 30 mbar (millibars). This is regulated in a standard which is binding for EU member states – EN 1949. Accordingly, most gas equipment for leisure vehicles, such as boilers, gas grills, stoves or heating systems, are also designed for the nominal pressure of 30 mbar. But what if the gas system is still running with 50 mbar? Read more

How long does a hose assembly for LPG last?

/in , , , , , , , , , ,

Gas hoses are subject to high loads in some cases. Of course they can sometimes wear out very quickly. Hence the question whether the GOK hose assembly has a minimum service life. The answer: No, there is no time limit – at least not regarding the service life, but there is for the replacement. Read more

How do I find a specialist according to G 607 or G 608 for the gas test?

/in , ,

Upcoming gas test at your caravan or motor caravan? Or have you made a major change to the LPG system of your boat? Does this change the condition of the system or have you replaced the gas equipment, for example? In such cases, you will need a specialist to check the system on the leisure vehicle. Only: Where can you find one in this environment? Read more

Can the LPG cylinder be left in the sun?

/in , , , , ,

This is probably one of the most common and greatest fears of barbecue lovers: Will the LPG cylinder explode if it sits in the sun for too long? Even if for some, the combination of gas cylinder and direct sunlight is an explosive mixture in the truest sense of the word, these fears are unfounded. We’ll show you why. Read more

Can I also use the GOK red pressure regulator for the gas barbecue?

/in ,

The “red pressure regulator” refers to a special type of pressure regulator. These are the pressure regulators with the highest safety standard, type EN61-DS. This fitting is expressly suitable for use in buildings. Can it also be used in the open air without any concern, for example on a gas barbecue or outdoor heater? Read more

What does the marking on the gok gas hose mean?

/in , , , , , , , ,

The orange gas hose from GOK has a few details printed on the material – some of which will certainly be obscure to users. This is why we have decided to show you in this article which data is printed on the hose assemblies and which is not. Read more

How can I digitally monitor the filling level of the gas tank?

/in , , ,

In the course of digitalisation, smart devices take on the tasks that people used to do. In many areas today, a well-organized logistics system is essential. This also applies to planning requirements for LPG systems and the LPG tank. Read more

What is better: the gas hose made of rubber or plastic?

/in ,

After a while, you take a look at your gas hose and see: It is so worn, porous or simply old that you absolutely have to replace it. You set out to visit the specialist shop, or find information online. In most cases, you can choose between a rubber or plastic hose assembly. But which is the right one? Read more

Why is a butane or propane gas cylinder never filled to 100 percent?

/in , , , , ,

It’s a curious thing: You go to the LPG retailer or the DIY shop and want to replace your empty gas cylinder with a full one. But you get one back which is only 80 percent full. If you’re a bit of a conspiracy theorist, we’ll tell you now: There are very practical and important reasons why a butane and propane gas cylinder is never filled to 100 percent – for your own safety. Read more

This blog will never ask members of the public or unqualified persons to make changes to or fiddle around with technical systems themselves.

In accordance with the Industrial Safety Regulation (BetrSichV), a qualified person must take care of a system which requires monitoring.

A qualified person is someone who has the specific specialist knowledge required. This knowledge is gained by way of a professional apprenticeship, corresponding professional experience or current occupational activity.

Please note that the texts are based on information, regulations and standards for Germany. Please always check the rules and regulations in the relevant country of destination and consult specialists if necessary.

Regler- und Armaturen-Gesellschaft mbH & Co. KG

Address

Obernbreiter Straße 2-18
97340 Marktbreit / Germany

Phone: +49 9332 404-0
Fax: +49 9332 404-49

Email: info@gok.de
Website: www.gok.de

Quick selection